You can integrate your scale directly with Cashier so that you and your budtenders can accurately price bulk bud. This article will guide you through setting up and using these scales.

Flowhub supports two USB scales, the BCI FX-1200iN-FH and the BCI FX-300iN-FH. These scales also require the BCI FXI-02-FH interface to allow a USB connection to your computer. Supported scales and the USB interface can be found in the scale section of our Barcodes partner page.


  1. Connected the USB interface to the back of your scale, then use a USB cable to connect the scale to your computer.

  2. Turn on the scale and place an item on the scale.

  3. Once the weight stabilizes, place your cursor into the quantity field on the cashier screen.

  4. Hit the print button on the scale.

  5. The weight from the scale will appear below your bulk bud.


If you have trouble with your scale, try some of the troubleshooting steps below. If you continue to have problems with your scale, please get in touch with our hardware partner Barcodes or the scale manufacturer for assistance.

  1. Check the USB connections on the back of the scale and the computer.

  2. Turn the printer off and back on.

  3. Recalibrate the scale. Please see the manual for instructions on how to recalibrate your scale.

Flowhub Classic

If you are running cashier 1.0, the steps above will allow you to integrate a scale with your system.

Did this answer your question?